Wishon 752TC Trajectory Control Irons
Features:
- 752TC is a full, deep cavity back iron with more side wall weighting for higher perimeter weighting which means better feel and more distance when hit off-center.
- 752TC blade shape features a more traditional topline slope angle but in a slightly larger overall size to enhance the perimeter weighting of the higher mass side wall design.
- 752TC features a slightly thicker top line and an extended weight pad off the back of the sole to move the Center of Gravity farther back from the shaft; Moving the CG back from the shaft helps to increase the trajectory of the ball for more carry distance and better backspin.
- The rear weight pad reduces in size in each 752TC iron as the loft increases down through the set; as loft increases, there is less need for design features that increase trajectory.
- Offset is progressive from 6mm on the #3-iron down to 2mm on the wedges. More offset places the CG farther behind the shaft which in turn increases the trajectory on the lower lofted ironheads.
- 752TC irons also feature the TWGT "Smart-Sole" design - wide sole area for lower CG but with the front and back edges of the sole radiused up to reduce sole surface contact for less chance of "fat shots."
- Finished in Brilliant Mirror polish with laser cut TW logo metal medallion in the back cavity.
Available in RH in #3-9, PW, AW, SW, LW; LH in #3-9, PW, SW.
752TC Irons
| 752 specifications |
| Club |
Loft |
Lie |
Weight |
Offset |
Sole Angle |
Toe Height |
Heel Height |
Blade Length |
RH/LH |
| 3-iron |
21° |
60.0° |
239 g. |
5.5mm |
1.0° |
55.0mm |
34mm |
79.0mm |
RH/LH |
| 4-iron |
24 |
60.5 |
246 |
5.0 |
1.0 |
56.0 |
34.5 |
79.0 |
RH/LH |
| 5-iron |
27 |
61.0 |
253 |
4.5 |
2.0 |
57.0 |
35.5 |
79.0 |
RH/LH |
| 6-iron |
31 |
61.5 |
260 |
4.0 |
2.0 |
57.5 |
36.0 |
79.0 |
RH/LH |
| 7-iron |
35 |
62.0 |
267 |
3.5 |
2.0 |
58.0 |
36.5 |
79.0 |
RH/LH |
| 8-iron |
39 |
62.5 |
274 |
3.0 |
3.0 |
59.0 |
37.0 |
79.0 |
RH/LH |
| 9-iron |
43 |
63.0 |
281 |
2.5 |
3.0 |
59.5 |
37.5 |
79.0 |
RH/LH |
| PW |
47 |
63.5 |
284 |
2.5 |
5.0 |
60.0 |
38.0 |
79.0 |
RH/LH |
| AW |
52 |
64.0 |
284 |
2.5 |
5.0 |
61.0 |
38.5 |
79.0 |
RH |
| SW |
56 |
65.0 |
298 |
2.0 |
12.0 |
62.0 |
39.0 |
79.0 |
RH/LH |
| LW |
60 |
65.0 |
294 |
2.0 |
8.0 |
61.0 |
38.5 |
79.0 |
RH |
| Bore Depth |
30mm in all 752TC ironheads
Weight Bore in
all 752TC heads for final swingweighting |
| Ferrule Required |
Yes. Choose iron ferrule with a 13.2mm bottom O.D |
| Scorelines |
U-groove |
| Head Body Mat. |
Investment cast from 431 Stainless Steel |
| Loft/Lie Bending |
Yes, but we do not recommend bending more than 2° in any direction. |
| Sole Width Range |
3-iron (19mm/16-5mm)
6-iron (20mm/17mm)
9-iron (21mm/18mm) |
| Sole Radius Face to Back |
50mm (#3-6)
60mm (#7-PW)
70mm (AW, SW, LW) |
|