Wishon 705w2 Irons
Traditional, slightly oversize design with progressive back cavity weighting and tour radiused/beveled sole
Features
- Two weight bores on each head allows addition of up to 15 grams to allow for easier MOI matching or assembly to shorter custom fit lengths.
- Progressive back cavity design moves the CG progressively from low on the long irons to higher on the short irons - ideal for most golfers.
- Beveled leading/trailing edge with tour radius sole offers golfers the ideal sole design for reducing "fat" shots and easier play from fairway or rough.
- Traditional profile and shape combines with low offset to offer an ideal combination of game improvement with classic, traditional design features.
PRODUCTS
Heads
Shafts
Grips
| 705w2 specifications | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Club | Loft | Lie | Weight | Offset | Sole Angle | Toe Ht. | Heel Ht. | Blade Length | RH/LH | |
| 3-iron | 21° | 59° | 239g | 3mm | 2 ° | 54.5mm | 31.5mm | 80mm | RH | |
| 4-iron | 24 | 60 | 246 | 3 | 2 | 55 | 32 | 80 | RH | |
| 5-iron | 27 | 61 | 253 | 3 | 2 | 55.5 | 32.5 | 80 | RH | |
| 6-iron | 30 | 61.5 | 260 | 3 | 2 | 56 | 33 | 80 | RH | |
| 7-iron | 34 | 62 | 267 | 3 | 2 | 57 | 33.5 | 80 | RH | |
| 8-iron | 38 | 63 | 274 | 2.5 | 3 | 58 | 34 | 80 | RH | |
| 9-iron | 43 | 64 | 281 | 2.5 | 3 | 58 | 35 | 80 | RH | |
| PW | 48 | 64 | 284 | 2 | 4 | 58 | 35 | 80 | RH | |
| AW | 52 | 64 | 284 | 2 | 5 | 58 | 35 | 80 | RH | |
| SW | 56 | 64 | 298 | 2 | 11 | 59 | 36 | 80 | RH | |
| Head/Body Material | Investment Cast from Annealed 431 Stainless Steel |
| Ferrule Required | Yes, IR ferrule with 13.2mm bottom OD |
| Scorelines | U-groove |
| Loft/Lie Bending | Yes, +/-2° in any direction |
| Bore Depth | 30mm |
| Bore Diameter | 0.370" parallel |
| Weight Bore | Two, Hosel weight bore accepts up to 9g; Back of toe weight bore accepts 2g or 6g weights. For 4g weight addition to toe weight bore, grind down the 6g weight. |
| Sole Width Range | #3-Iron - 19mm/14mm #6-Iron - 18mm/13.5mm #9-Iron - 17mm/13.5mm |
| Sole Radius Face to Back | #3-6 irons = 80mm/70mm, Beveled Leading/Trailing Edges #7-PW = 90mm/80mm, Beveled Leading/Trailing Edges AW, SW, LW = 100mm/90mm, Beveled Leading/Trailing Edges |
NOTE: Rear toe weight bore accepts 2g brass or 6g tungsten weights. |
|